manualshive.com logo in svg

Hitachi AMS 2000 Series, Reference Manual

Share
Download
Hitachi AMS 2000 Series Reference Manual Download Page 120

1–102

Performing CCI Operations

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

Options 
(continued)

-d[g] <seq#> <LDEV#> [MU#]:

 

Searches a group on the configuration 

definition file (local instance) for the specified LDEV, and if the specified LDEV 
is contained in the group, the target volume is executed as the paired logical 
volume (-d) or group (-dg). This option is effective without specifying the “-g 
<group>“ option. If the specified LDEV is contained in two or more groups, 
the command is executed on the first group. The <seq #> <LDEV #> values 
can be specified in hexadecimal (by addition of “0x”) or decimal notation.
-t <timeout>:

 

Specifies the timeout value to wait for the completion. The 

unit is 100 ms. Local array gets the latest sequence # from remote array at 
regular interval.
-nowait:

 

Gets the latest sequence # of local array P-VOL and CTGID without 

waiting. When this option is specified, the latest sequence # of local array P-
VOL is reported immediately, and -t <timeout>option is ignored.
-nomsg:

 

Suppresses messages to be displayed when this command is 

executed. It is used to execute a command from a user program. This option 
must be specified at the beginning of a command argument. The command 
execution log is not affected by this option.
-m <marker>:

 

Specifies the sequence # of local array P-VOL, called the Q-

marker. If the application gets Q-marker as the result of execution of 
pairsyncwait because of timeout or “-nowait”, the application can reconfirm 
the completion of asynchronous transfer by using pairsyncwait with Q-marker. 
If the application does not specify Q-marker, CCI uses the latest sequence # 
when CCI receives pairsyncwait. It is also possible to wait for the completion 
from S-VOL side with this option.

Q-Marker format: = iissssssss, where ii = incarnation # of pair volume, and 
ssssssss = P-VOL serial #.

Returned 
values

When the -nowait option is specified:

Normal termination:0:

 

The status is NOWAIT.

Abnormal termination:

 

other than 0 to 127, refer to the execution logs for 

error details.
When the -nowait option is not specified:

Normal termination:0: The status is DONE (completion of synchronization).

1: The status is TIMEOUT (timeout).

2: The status is BROKEN (Q-marker synchronized process is rejected).

3: The status is CHANGED (Q-marker is invalid due to resynchronize).

Abnormal termination:

 

other than 0 to 127, refer to the execution logs for 

error details.

Table 1-38:  Pairsyncwait Command Parameters  (Continued)

Parameter

Value

Summary of Contents for AMS 2000 Series







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands