Hitachi AMS 2000 Series, Reference Manual

Page: 216 / 262

3–60
Maintenance log and tracing functions
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9622 007E 84 The pool LU is undergoing the
forced parity correction. Retry after waiting for a
while.
9622 007F 84 There is one or more P-VOLs, the
status of the forced parity
correction for which is Uncorrected
or Uncorrected 2, in the target
CTG. Check the status of each LU
in the target CTG.
9622 0080 84 There is one or more P-VOLs,
status is normal or other than
regressed, in the target CTG Check the status of each LU
in the target CTG.
9622 0081 84 There is one or more TCE P-VOLs,
which is cascaded with a SnapShot
P-VOL being restored, in the target
CTG. Check the status of each LU
in the target CTG.
9622 0082 84 There is one or more TCE P-VOLs,
which is cascaded with a SnapShot
P-VOL that was placed in the PSUE
status during restoration, in the
target CTG. Check the status of each LU
in the target CTG.
9622 0083 84 There is no pair, which is in the
PSUS or PSUE status, in the target
CTG. Check the pair status of each
LU in the target CTG.
9622 0084 84 When a pair is created in the new
CTG, the cycle time that has been
set is less than “30 x number of
CTGs” seconds. Check the cycle time that has
been set.
9622 0085 84 When the unit of pair is specified,
the S-VOL of the target pair has
not completed the
resynchronization after it accepted
the resync command. Check the TCE pair status of
the remote array.
9622 0086 84 When the unit of CTG is specified,
there is one or more S-VOLs,
which has not completed the
resynchronization after it accepted
the resync command, in the target
CTG. Check the TCE pair status of
the remote array.
9622 0087 84 There are one or more pairs in the
status of “under pair splitting” or
“under pair competing” in the
CTG. Retry after waiting for a
while.
9622 0088 84 The specified P-VOL is the
reserved LU. Check the status of the LU.
9622 0089 84 The specified P-VOL is undergoing
the migration. Check the pair status of the
LU.
9622 008A 84 The disk drives that configure a
RAID group, to which the specified
P-VOL belongs have been spun
down. Check the status of the RAID
group.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action