Hitachi AMS 2000 Series, Reference Manual

Page: 193 / 262

Maintenance log and tracing functions
3–37
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9609 x08A 94 The S-VOL in the remote array
cannot be allocated the differential
bit of TCE pair because the
capacity is beyond the supported
limit.
Or the copy operation cannot be
performed because the capacity of
the DP pool is depleted or can be
depleted by this copy for either the
S-VOL or an S-VOL of
ShadowImage cascading in the
remote array.
Check the status of the
remote array. In addition,
delete unnecessary pairs of
the remote array.
Or resolve the insufficient
capacity of the DP pool and
retry.
9609 x08B 94 The capacity of TCE pair is beyond
the limits within the remote array. Confirm the capacity of all
SnapShot P-VOLs, all P-VOLs
and S-VOLs of TCE pairs, and
data pools less than or equal
to the supported capacity for
the installed cache memory.
9609 x08C 94 The process is in progress. Retry after waiting for a
while.
9609 x08D 94 The S-VOL of the remote array
does not meet the conditions of
cascading with a SnapShot pair. Check the status of the LU in
the remote array.
9609 x08E 94 The S-VOL in the remote array has
created a ShadowImage pair. The TCE and ShadowImage
volumes cannot be cascaded
with each other. Check the LU
status of the remote array.
9609 x091 94 The serial number of the S-VOL in
the remote array is wrong. Check the serial number of
the remote array.
9609 x094 94 The RAID level of the S-VOL in the
remote array is RAID 0. Make the RAID level of the
remote array other than
RAID 0.
9609 x095 94 The S-VOL in the remote array is
undergoing the forced parity
correction. Check the status of the
remote array and retry after
waiting for a while.
9609 x096 94 The S-VOL in the remote array is a
SnapShot

V-VOL.
The TCE and SnapShot V-
VOLs cannot be cascaded
with each other. Check the LU
status of the remote array.
9609 x097 94 The S-VOL in the remote array
received an illegal command. Check the status of the
remote array.
9609 x098 94 The S-VOL in the remote array is
changing the cache partition. Check the status of the
remote array and retry after
waiting for a while.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action