Hitachi AMS 2000 Series, Reference Manual

Page: 101 / 262

Performing CCI Operations
1–83
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
•
Correct example 1:
•
Correct example 2:
•
Incorrect example:
•
Environment variable subcommands
If no environment variables are set in the execution environment, the
environment variable subcommand sets or cancels an environment variable
within the CCI command. The setenv subcommand sets the specified
environment variables. The usetenv subcommand deletes the specified
environment variables. The env subcommand command displays the
environment variables. The sleep subcommand causes CCI to wait for the
specified time. Table 1-33 lists and describes the environment variable
subcommands and their parameters.
•
Note 1: For Windows 2000 or Windows Server system, Even if this sub
command is executed, a drive letter may not be deleted. In this case, the
target volume may be used. Execute the command after making the target
volume to unused status. Alternatively, a drive letter can be deleted by
activating the Disk Management in the Control Panel

Administrative Tools

Computer Management

Storage folder.
Note 2: If you use the mount command with directory mount option on the
Windows 2000 or Windows Server, the umount command must be used
with directory mount option.
pairsplit -x mount F:\ hdisk2

pairsplit -x umount F:\
pairsplit -x mount F: hdisk2

pairsplit -x umount F:
pairsplit -x mount F:\ hdisk2

pairsplit -x umount F:
CAUTION! The environment variables must be set before connecting to
HORCM, and must be specified during interactive mode (-z option).
Changing an environment variable after a CCI command execution error is
invalid.