Hitachi AMS 2000 Series, Reference Manual

Page: 196 / 262

3–40
Maintenance log and tracing functions
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9609 x0BD 94 The S-VOL in the remote array
cannot change an ownership of LU
and a time-out occurred. Check the status of the
remote array and retry after
waiting for a while.
9609 x0BE 94 The S-VOL in the remote array
cannot change an ownership of LU
and, at the same time, the CTG#
is illegal. Check the status of the
remote array.
9609 x0C0 94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, its disk drives are being spun
up. Check the status of the
remote array and retry after
waiting for a while.
9609 x0C1 94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, it is making the system copy. Check the status of the
remote array and retry after
waiting for a while.
9609 x0C2 94 The S-VOL in the remote array
does not exist on the default
owner controller and, at the same
time, it is writing the takeover
information. Check the status of the
remote array and retry after
waiting for a while.
9609 x0C5 94 The cycle time that has been set
for the remote array is less than
the minimum interval. Check the cycle time that has
been set for the remote
array.
9609 x0D9 94 The status of the remote array is in
an inappropriate condition to
operate the TrueCopy pair. Check the Array ID, pair
status of local and remote
replication, status of the
RAID group to which the
target LU belongs, and
reconfigure memory status.
Retry after waiting the RAID
group status becomes
Normal in case that the RAID
group indicate a status other
than Normal. Retry after the
process of reconfigure
memory is completed if it is
in progress.
9609 x0E0 94 Auto Migration is being executed
in the remote array just now. Execute again after the
Migration is completed.
9609 x0E5 94 The RAID group, in which the LU
belongs that will be specified to
the S-VOL of the remote array,
indicates a status other than
Normal. Retry when the status
becomes Normal.
9609 x0EA 94 The LU created in DP pool was
specified as S-VOL. Specify an LU other than the
LU created in DP pool.
9609 x0EA 94 Management information of
Dynamic Provisioning for the LU
specified as S-VOL in the remote
array is being updated. Retry after waiting a while.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action