Hitachi AMS 2000 Series Reference Manual Download Page 181

Page: 181 / 262

Maintenance log and tracing functions

3–25

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

9608

0015

The data pool LU being used is in a
status other than normal or
regressive.

Check the status of the pool
LU.

9608

0016

There is no V-VOL corresponding
to the specified P-VOL.

Check the status of the LU.

9608

0017

The pair attribute of the P-VOL is
V-VOL.

Check the status of the LU.

9608

0018

The pair attribute of the V-VOL is
P-VOL.

Check the status of the LU.

9608

0019

The object LUN is not the same as
the expected one.

Check the specified LU.

9608

001A

The same MU number was
specified within the same P-VOL.

Make sure of the specified MU
number.

9608

001B

The process is in progress.

Retry after waiting for a
while.

9608

001D

The object LUN is not the same as
the expected one.

Check the specified LU.

9608

001E

The specified V-VOL is not
specified to be grouped. (Group ID
suspension)

Check the pair attribute of
the LU.

9608

001F

The V-VOL, which is an object of
the batch suspension, is in a status
other than PAIR. (Group ID
suspension)

Check the pair status of the
LU.

9608

0020

The process is in progress.

Retry after waiting for a
while.

9608

0021

The process is in progress.

Retry after waiting for a
while.

9608

0022

The pair status of the V-VOL is
illegal.

Check the pair status of the
LU.

9608

0023

The object LUN is not the same as
the expected one.

Check the specified LU.

9608

0028

The specified MU number is
different from that of the specified
V-VOL.

Make sure of the specified MU
number.

9608

0029

The specified MU number is
different from that of the specified
V-VOL.

Make sure of the specified MU
number.

9608

002A

The specified MU number is
different from that of the specified
V-VOL.

Make sure of the specified MU
number.

9608

002B

The pair status was changed to
PSUE because the process
terminated abnormally.

Place the pair concerned in
the SMPL status once, and
then create the pair again.

9608

002C

The specified P-VOL has excess
pinned data (at the time of a
restoration only).

Retry after eliminating
pinned data.

Table 3-5: Sense Codes (Continued)

Sense

code

Detailed

code

Sub

code

Error contents

Recommended Action

Summary of Contents for AMS 2000 Series







































































































































































































































































Search results

Summary of Contents for AMS 2000 Series

Reviews:

Brands by name

Popular brands

Hitachi AMS 2000 Series, Reference Manual

Search results

Summary of Contents for AMS 2000 Series

Reviews:

Brands by name

Popular brands