Hitachi AMS 2000 Series, Reference Manual

Page: 85 / 262

Performing CCI Operations
1–67
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Figure 1-51: Raidvchkscan Command Examples with -v gflag Options
The output of the raidqvchkscan command with –v gflag option includes:
• Port#:
Shows the port name of the AMS array.
• ALPA/C: For the fibre channel, shows the physical address of the Fibre
channel in a port.
• TID#: Shows the target ID of the AMS array.
• LU#: Shows the LU number.
• Seq#: Shows the production (serial#) number of the AMS array.
• Num: Shows the number of the volumes which constitute LU# (one
fixed).
• LDEV#: Shows the LDEV# within the AMS array. LDEV indicates LU.
• GI-C-R-W-S: This displays the flags for guarding as for the target
volume. 
I=E: The volume is permitted to accept the Inquiry command. 
I=D: The volume is not permitted to accept the Inquiry command. 
C=E: The volume returns the formal volume size in reply. 
C=D: The volume returns the size zero in reply. 
R=E: It is permitted to read from or to the object volume. 
R=D: It is prohibited to read from or to the object volume. 
W=E: It is permitted to write from or to the object volume. 
W=D: It is prohibited to write from or to the object volume. 
S=E: The volume can be assigned to an S-VOL. 
S=D: The volume cannot be assigned to an S-VOL.
• PI-C-R-W-S: This displays the permission flags that shows whether
each mode flags can be changed to enable or not. 
I=E: This shows that “I” flag can be changed to enable. 
I=D: This shows that “I” flag cannot be changed to enable. 
C=E: This shows that “C” flag can be changed to enable. 
C=D: This shows that “C” flag cannot be changed to enable. 
R=E: This shows that “R” flag can be changed to enable. 
R=D: This shows that “R” flag cannot be changed to enable. 
W=E: This shows that “W” flag can be changed to enable. 
W=D: This shows that “W” flag cannot be changed to enable. 
S=E: This shows that “S” flag can be changed to enable. 
S=D: This shows that “S” flag cannot be changed to enable.
• R-Time: The term of protection set for the LU is displayed with a
number of days. When “-“ is displayed, it means that the term is
indefinite. 
Expiration Lock status is shown as the retention time plus 1000000. 
”R-Time + 1000000” shows the retention time with Expiration Lock
status.
# raidvchkscan –p CL1-A –v gflag

PORT# /ALPA/C TID# LU# Seq# Num LDEV# GI-C-R-W-S PI-C-R-W-S R-Time

CL1-A /ef/ 0 0 2 85002332 1 2 D D D D D E E E D D 365

CL1-A /ef/ 0 0 3 85002332 1 3 E E E E E E E E E E -