Hitachi AMS 2000 Series, Reference Manual

Page: 96 / 262

1–78
Performing CCI Operations
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Mount subcommand
The mount subcommand mounts the specified drive to the specified
partition on the specified hard disk drive. If the mount subcommand is
executed without specifying an argument, all drives that are currently
mounted are displayed. Table 1-31 on page 1-79 lists and describes the
mount subcommand parameters.
For the directory mount, specify the mount point in the form of F:\ or D:\hdl
(with \)
Figure 1-61 on page 1-79 show examples of the mount subcommand used
as an option of the pairsplit command output. Do not use the mountvol
command to un-mount the volume if the volume was mounted using the 
-x mount command.
•
Correct Example :
Wrong Example :
Wrong Example :
•
•
•
Be awa
CAUTION! The partition on the specified disk drive (hard disk) must be
recognized on the Windows 2000 or Windows Server system.
% pairsplit -x mount F:
% pairsplit -x mount F:\mnt
% pairsplit -x mount F:\
CAUTION! To avoid Windows Server mount problems, set
USE_MOUNTVOL_P of the environment variable. To avoid mount problems
associated with event ID1, set this environment variable.
CAUTION! When directory mount is not used, logging off of Windows
2000 or Windows Server system will force the unmount. When logging off
from Windows 2000 or Windows Server, avoid a forced unmount by
executing the mount via the system account using a task scheduler, and
so on
CAUTION! When using CCI on a Windows Servers system, use the
USE_MOUNTVOL_P of the environment variable to avoid mount problems
due to an event ID1 occurrence.