Hitachi AMS 2000 Series, Reference Manual

Page: 192 / 262

3–36
Maintenance log and tracing functions
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9609 x037 94 The remote array is busy.
Or the copy operation cannot be
performed because the capacity of
the DP pool is depleted or can be
depleted by this copy for either the
S-VOL or an S-VOL of
ShadowImage cascading in the
remote array.
Or the status of the object LU is
ather than normal or regression.
Or the full capacity mode is not
supported.
Retry after checking the pair
status of the LU, Array ID,
number of the connected
arrays, and group number.
Or resolve the insufficient
capacity of the DP pool and
retry.
Or make the status of the
object LU normal or
regression. Or check the
firmware version of array.
9609 x038 94 Both of the two paths of the
remote array were detached. Check the status of the path.
9609 x039 94 The process is in progress. Retry after waiting for a
while.
9609 x03A 94 The process is in progress. Retry after waiting for a
while.
9609 x03E 94 The S-VOL command is receiving a
command. Retry after waiting for a
while.
9609 x041 94 The S-VOL of the remote array is
doing a duplicate writing. Retry after waiting for a
while.
9609 x042 94 The capacity is beyond the limits
of supported. Delete unnecessary pairs of
the remote array.
9609 x058 94 The ShadowImage P-VOL of the
remote array is in the PSUE (S-
VOL Switch) status. Contact the service
personnel.
9609 x086 94 The S-VOL of the remote array is
specified as a command device. Specify a volume other than
a command device of the
remote array as the S-VOL.
9609 x087 94 The S-VOL of the remote array is
executing format.

Or management information of
Dynamic Provisioning for the LU
specified as S-VOL in the remote
array is being updated.
Create the pair again after
the quick formatting is
completed.
Or retry after waiting a while.
9609 x088 94 The S-VOL of the remote array is
specified as the DM-LU. Specify a volume other than
the DM-LU of the remote
array as the S-VOL.
9609 x089 94 The S-VOL of the remote array is
in the status of S-VOL Disable. Check the status of the
remote array and cancel the
access attribute.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action