manualshive.com logo in svg

Hitachi AMS 2000 Series, Reference Manual

Share
Download
Hitachi AMS 2000 Series Reference Manual Download Page 65

Performing CCI Operations

1–47

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

•

• NG: The horctakeover command is rejected, and the operation 

terminates abnormally.

• Nop-Takeover: The horctakeover command is accepted, but no 

operation is performed.

• Volumes not conform: The volumes are not in sync, and the 

horctakeover command terminates abnormally.

• Unknown: The remote node attribute is unknown and cannot be 

identified. The remote node system is down or cannot communicate.

• SSWS: Suspend for Swapping with S-VOL side only. The SSWS state is 

displayed as SSUS (SVOL_PSUS) by ALL commands except the -fc 

option of the pairdisplay command.

When the attribute of the self-node volume is SSUS, the target displays the 

NG message but the status changes to SSWS.

Table 1-17:  Volume Attributes and Takeover Actions (TCE) 

Local Node (Takeover Node)

Remote Node

Volume 

Attribute

Fence Level and 

Status

Volume 

Attribute

P-VOL 

Status

Takeover Action

SMPL

-

SMPL

-

NG 

[1]

P-VOL

-

Nop-Takeover 

[2]

S-VOL

-

Volumes not conform 

[3]

Unknown 

[4]

-

NG

P-VOL

(primary)

Fence = Async

SMPL

-

NG

P-VOL

-

Volumes not conform

S-VOL

-

Nop-Takeover

Unknown

-

Nop-Takeover

S-VOL

(secondary)

Fence = Async

and

Status = SSWS

-

-

Nop-Takeover

Fence = Async

and

Status = PSUS(N)

-

-

NG

Fence = Async

and

Status = COPY

-

-

NG

Others

SMPL

-

Volumes not conform

P-VOL

PAIR

SVOL-Takeover

Others

SVOL-Takeover Note 2

S-VOL

-

Volumes not conform

Unknown

-

SVOL-Takeover Note 2

Summary of Contents for AMS 2000 Series







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands