manualshive.com logo in svg

Hitachi AMS 2000 Series, Reference Manual

Share
Download
Hitachi AMS 2000 Series Reference Manual Download Page 144

2–22

Troubleshooting

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

EX_ENODEV

No such device The designated 

device name does 
not exist in the 
configuration file.

Verify the device name and add it to 
the configuration file of the remote 
and local hosts.

246

EX_ENOUNT

No such RAID 
unit

The designated 
RAID unit ID does 
not exist in the 
configuration file.

Verify the RAID unit ID and add it to 
the configuration file of the remote 
and local hosts.

219

EX_ENQSER

Unmatched 
Serial# vs 
RAID unitID

The group 
designated by 
ShadowImage/
SnapShot 
paircreate does 
not have the same 
RAID unit, or the 
unitID is not 
identical to the 
unit ID in the 
same RAID 
serial#.

Verify the serial# (serial number) 
using the pairdisplay command, or 
confirm serial# of the RAID using the 
raidqry –r command

218

EX_ENOMEM

Not enough 
core

Insufficient 
memory exists.

Increase the virtual memory capacity 
of the system, or close any 
unnecessary programs and daemon 
processes.

245

EX_ERANGE

Result too 
large

Tried to use 
arguments for an 
option beyond the 
maximum 
allowed, or a 
result beyond the 
maximum was 
created.

Refer to the error message, and 
designate an appropriate value.

244

EX_ENAMLG 

File name too 
long

Undefined error.

-

243

EX_ENORMT

No remote host 
alive for 
remote 
commands or 
Remote Raid 
Manager might 
be 
blocked(sleepi
ng) on an 
existing I/O

A timeout 
occurred on 
remote 
communication, 
and HORC 
Manager failed to 
re-execute.

Confirm that the HORC Manager in the 
remote host is running, and then 
increase the value of the timeout in 
the configuration file.

If you want to execute within the local 
host, execute the command that 
supports the local option (-l).

242

EX_INVMOD

Invalid RAID 
command 
mode

Detected a 
contradiction for a 
command.

Collect all HORCM log information, and 
call the Hitachi Support Center.

241

EX_INVCMD

Invalid RAID 
command

Detected a 
command error.

Collect all HORCM log information, and 
call the Hitachi Support Center.

240

Table 2-7:  Command Error Messages  (Continued)

Message ID

Error 

Message

Condition

Recommended Action

Return

Value

Summary of Contents for AMS 2000 Series







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands