Hitachi AMS 2000 Series Reference Manual Download Page 183

Page: 183 / 262

Maintenance log and tracing functions

3–27

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

9608

003E

The V-VOL is a volume of TrueCopy
and in a status other than SMPL.

Check the status of the
TrueCopy pair.

9608

0044

The DM-LU is not set.

Retry after setting the DM-
LU.

9608

0045

The DM-LU was specified as P-
VOL.

Check the status of the LU.

9608

0046

The DM-LU was specified as V-
VOL.

Check the status of the LU.

9608

0047

The DM-LU is not set.

Retry after setting the DM-
LU.

9608

0048

The DM-LU was specified as P-
VOL.

Check the status of the LU.

9608

0049

The DM-LU was specified as V-
VOL.

Check the status of the LU.

9608

004A

Validity of the license expired.

Purchase the license.

9608

004B

Validity of the license expired.

Purchase the license.

9608

0052

The specified P-VOL is a P-VOL of
TCE and the status of the TCE pair
is other than PSUS (at the time of
restoration).

Check the status of the LU.

9608

0053

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is PSUS and writing to the S-VOL is
prohibited (at the time of
restoration).

Check the status of the LU.

9608

0054

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is SSWS(R) (at the time of
restoration).

Check the status of the LU.

9608

0056

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is PSUS and reading from writing
to the S-VOL is prohibited (at the
time of restoration).

Check the status of the LU.

9608

0057

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is other than SMPL or PSUS (at the
time of restoration).

Check the status of the LU.

9608

0058

The P-VOL of this SnapShot is the
S-VOL of the TCE pair. It cannot be
executed because the status of
this TCE pair is COPY or PAIR.

Check the status of the LU.

9608

0059

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is PSUS and reading from or
writing to the S-VOL is prohibited.

Check the status of the LU.

9608

005A

The specified P-VOL is an S-VOL of
TCE and the status of the TCE pair
is COPY or PAIR.

Check the status of the LU.

Table 3-5: Sense Codes (Continued)

Sense

code

Detailed

code

Sub

code

Error contents

Recommended Action

Summary of Contents for AMS 2000 Series







































































































































































































































































Search results

Summary of Contents for AMS 2000 Series

Reviews:

Brands by name

Popular brands

Hitachi AMS 2000 Series, Reference Manual

Search results

Summary of Contents for AMS 2000 Series

Reviews:

Brands by name

Popular brands