Hitachi AMS 2000 Series, Reference Manual

Page: 167 / 262

Maintenance log and tracing functions
3–11
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
9576 0027 84 The S-VOL received an instruction
to resynchronize pair. Check the pair status of the
LU.
9576 0028 84 The volume is a P-VOL of
ShadowImage. It is in the PSUE
status and cannot accept Read/
Write instructions. Place the P-VOL concerned in
the SMPL status and create
the pair again.
9576 0029 84 The volume is a P-VOL of
ShadowImage and undergoing a
reverse copy. Check the pair status of the
LU.
9576 002A 84 The P-VOL received an instruction
to be taken over. Check the pair status of the
LU.
9576 002B 84 It is in the SMPL or COPY status. Check the pair status of the
LU.
9576 002C 84 The secondary sequence number
is different from the Array ID. Check the Array ID.
9576 002D 84 The S-VOL received an instruction
to be taken over. Check the pair status of the
LU.
9576 002E 84 The pair status of the P-VOL is
SMPL or COPY. Check the pair status of the
LU.
9576 002F 84 The primary sequence number is
different from the Array ID. Check the Array ID.
9576 0030 84 The S-VOL received the pairsplit -
E (pair suspend) command. Check the pair status of the
LU.
9576 0031 84 The capacity is beyond the limits
of support. Split the unnecessary pairs.
9576 0032 84 The P-VOL is configured as RAID 0. Check the RAID level of the
specified LU.
9576 0033 84 The specified LU is an S-VOL of
ShadowImage and it is in a pair
status other than PSUS. Check the pair status of the
LU.
9576 0035 84 The volume is an S-VOL of
ShadowImage and it is in a pair
status other than PSUS. Check the pair status of the
LU.
9576 0036 84 The volume is a P-VOL of
SnapShot and being restored. Check the pair status of the
LU.
9576 0037 84 The volume is a P-VOL of
SnapShot. It is in the PSUE status
and cannot accept Read/Write
instructions. Change the statuses of all V-
VOLs of the P-VOL concerned
to SMPL, and create the pair
again.
9576 0038 84 The volume is a P-VOL of
SnapShot and the mate to it has
already been paired by TrueCopy. Check the pair status of the
LU.
9576 0039 84 The volume is a V-VOL of
SnapShot and it is in a status other
than PSUS of SnapShot. Check the pair status of the
LU.
Table 3-5: Sense Codes (Continued)
Sense
code
Detailed
code
Sub
code
Error contents Recommended Action