manualshive.com logo in svg

Hitachi AMS 2000 Series, Reference Manual

Share
Download
Hitachi AMS 2000 Series Reference Manual Download Page 48

1–30

Performing CCI Operations

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

•

Figure 1-24:  Pairmon Command

The output of the pairmon command includes:
• Group:

 

Shows the group name (dev_group) described in the 

configuration definition file.

• Pair vol:

 

Shows the paired volume name (dev_name) in the specified 

group which is described in the configuration definition file.

• Port

 

targ#

 

lun#:

 

Shows the port ID, TID, and LUN described in the 

configuration definition file.

• LDEV#:

 

Shows the array LDEV ID for the specified device. LDEV 

indicates LU.

• Oldstat:

 

Shows the old pair status when the status of the volume is 

changed.

• Newstat:

 

Shows the new pair status when the status of the volume is 

changed.

• Code:

 

Shows the array-internal code for the specified status.

Options 
(continued)

-D:

 

Selects the default report mode. In the default mode, if there is pair 

status transition information to be reported, one event is reported and the 
event is reset. If there is no pair status transition information to be reported, 
the command waits. The report mode consists of the three flags: -allsnd, -
resevt, and -nowait options.
-allsnd:

 

Reports all events if there is pair status transition information.

-resevt:

 

Reports events if there is pair status transition information, then 

resets all events.
-nowait:

 

When this option is specified, the command does not wait when 

there is no pair status transition information.
-s <status> ...:

 

Specifies the pair status transition to be reported:

 

smpl, 

copy (includes rcpy), pair, psus, psue. If two or more statuses are specified 
following -s, masking is done according to the logical OR of the specified 
statuses. If this option is not specified, pairmon displays all events which 
received information from HORCM.

Table 1-8:  Pairmon Command Parameters  (Continued)

Parameter

Value

NOTE:  In TrueCopy/TCE operation, do not specify the MU# to TrueCopy/

TCE pair.

# pairmon  -allsnd   -nowait

Group Pair vol

Port

targ#

lun#

LDEV#…

Oldstat code –> Newstat code

oradb oradb1

CL1-A

1

5

5…

SMPL

0x00 –> COPY

0x01

oradb oradb2

CL1-A

1

6

6…

PAIR

0x02 –> PSUS

0x04

Summary of Contents for AMS 2000 Series







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands