manualshive.com logo in svg

Hitachi AMS 2000 Series, Reference Manual

Share
Download
Hitachi AMS 2000 Series Reference Manual Download Page 199

Maintenance log and tracing functions

3–43

Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide

9612

0005

84

The P-VOL or S-VOL is being 
formatted.

Retry after the formatting is 
completed.

9613

0001

84

The S-VOL is in the S-VOL Disable 
mode.

Cancel the access attribute.

9613

0002

84

The P-VOL is in the S-VOL Disable 
mode (at the time of a 
restoration).

Cancel the access attribute.

9613

0003

84

The S-VOL Disable is specified for 
the P-VOL (at the time of a 
restoration only).

Cancel the access attribute.

9613

0004

84

The S-VOL Disable is specified for 
the S-VOL.

Cancel the access attribute.

9613

0005

84

Resynchronization is directed to 
the ShadowImage pair whose S-
VOL is specified as S-VOL Disable.

Check the attribute of the LU.

9613

0006

84

The S-VOL Disable is specified for 
the S-VOL (at the time of a 
restoration only).

Cancel the access attribute.

9618

0001

84

The P-VOL or S-VOL has not 
undergone the forced restoration 
by means of parity.

Retry after making the 
restoration by means of 
parity.

9618

0002

84

The P-VOL is undergoing the 
forced restoration by means of 
parity (at the time of a 
restoration).

Retry after the restoration by 
means of parity is completed.

9618

0003

84

The S-VOL is undergoing the 
forced restoration by means of 
parity.

Retry after making the 
restoration by means of 
parity.

9618

0011

84

The P-VOL has not undergone the 
forced restoration by means of 
parity.

Retry after making the 
restoration by means of 
parity.

9618

0012

84

The P-VOL is undergoing the 
forced restoration by means of 
parity.

Retry after the restoration by 
means of parity is completed.

9618

0021

84

The P-VOL or data pool LU has not 
undergone the forced restoration 
by means of parity.

Retry after making the 
restoration by means of 
parity.

9618

0022

84

The P-VOL is undergoing the 
forced restoration by means of 
parity (at the time of a 
restoration).

Retry after the restoration by 
means of parity is completed.

9618

0023

84

The data pool LU is undergoing the 
forced restoration by means of 
parity.

Retry after the restoration by 
means of parity is completed.

961C

0001

84

More LUs than supportable ones 
were specified for LUNs of the P-
VOL.

Make sure of the number of 
the specified paired LU.

Table 3-5:  Sense Codes  (Continued)

Sense

code

Detailed

code

Sub

code

Error contents

Recommended Action 

Summary of Contents for AMS 2000 Series







































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands