180
_____________________________________________________________________________________________
7.3 LAN
______________________________________________________________________________________________
7.3.6 TCP/IP Port
Setting Screen: LAN Setting
TCP/IP port (100x to 999x)
Port Setting
Increases in number
by one
Decreases in number
by one
Confirms the value
Increases in number by ten
Decreases in number by ten
NOTE
7.3.7 Delimiter
Setting Screen:
LAN Setting
Delimiter (CR+LF, LF)
NOTE
Sets the port used for communications commands.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2
.
Use the
CURSOR
key to select "
LAN
" on
"
Page
".
3. Use the
CURSOR
key to select "
TCP/IP
port
", then press the
ENTER
key.
4. Use the
CURSOR
key to change the port
value, then press the
ENTER
key to
confirm the value.
The setting range for the port is between
100
x
and 999
x
.
The default setting is 880
x
.
Sets the delimiter for communications commands.
Procedure
1. Press the
ADJUST/SYSTEM
key to
display the Adjustment screen.
2
.
Use the
CURSOR
key to select "
LAN
" on
"
Page
".
3. Use the
CURSOR
key to select
"
Delimiter
", then press the
ENTER
key.
4. Use the
CURSOR
key to select "
CR+LF
"
or "
LF
", then press the
ENTER
key.
CR+LF: Sets the delimiter to CR+LF.
LF : Sets the delimiter to LF.
The delimiter setting is common to
LAN and RS-232C.
