208
_____________________________________________________________________________________________
8.5 Output Terminals
______________________________________________________________________________________________
8.5.2 Output of Area Comparison Results <OK_AREA Terminals
(B4, B6), NG_AREA Terminals (B3, B5)>
Outputs the result of area comparison.
CH1 and CH2 are both compared separately, with the results being output
separately. (CH1 only for the 8730-10)
For an X-Y synthesized waveform, the same result is output for both CH1
and CH2.
The NG_AREA2 terminal (terminal No.: B3) outputs a signal when the
area comparison of CH2 is FAIL.
The OK_AREA2 terminal (terminal No.: B4) outputs a signal when the
area comparison of CH2 is PASS.
The NG_AREA1 terminal (terminal No.: B5) outputs a signal when the
area comparison of CH1 is FAIL.
The OK_AREA1 terminal (terminal No.: B6) outputs a signal when the
area comparison of CH1 is PASS.
Output Signal
When the comparison result is PASS, the OK_AREA1 and 2 terminals
output a low-level signal (active LOW).
When the comparison result is FAIL, the NG_AREA1 and 2 terminals
output a low-level signal (active LOW).
<When using an internal power supply>
HIGH level voltage: Max.: 5.5 [V], Min.: 3.5 [V] (When there is no load)
LOW level voltage : Max.: 1.0 [V], Min: 0 [V]
<When using an external power supply>
External power supply voltage V
EXT
: Max.: 30 [V] DC, Min.: 5 [V] DC
HIGH level voltage :Max.: V
EXT
[V], Min.: V
EXT
-1.0 [V] (When there is no load)
LOW level voltage :Max.: 1.0 [V], Min.: 0 [V]
