153
_____________________________________________________________________________________________
6.4 File Screen
______________________________________________________________________________________________
6.4.4 Saving the Text Data (CSV)
Command:
TEXT
Screen image when selecting "
Thin out
"
If a file with the same name already exists,
a warning message will appear
NOTE
Saves 8730-10, 8731-10 waveform data to a PC card.
The data is saved in text (CSV) format, delimited by commas (,).
Procedure
1. Press the
FILE
key, and display the File
screen.
2. Press the left
CURSOR
key to move the
cursor to a command.
3. Select "
TEXT
", then press the
ENTER
key.
4. Enter a filename. For details, see 8. in
3.1.2.
5. Move the cursor to "
CH
" and select the
channel for which to save data.
(Note 1)
6. For intermittent saves, move the cursor
to "
Thin out
" and press the
ENTER
key.
Then select an item on the menu and
press the
ENTER
key.
7. Press the
START
key to save the data;
press the
STOP
key to cancel.
Starts saving.
Cancels saving.
If the amount of data is too large, the data
may not be successfully saved on the PC
card. For details, see 13.3.
(Note 1) Channel selection is not possible
with the 8730-10.
"
TEXT
" data can be loaded with personal
computer only. It is not possible to load it
with 8730-10, 8731-10. When loading a data
with 8730-10, 8731-10, select "
WAVE
".
If a file with the same name already exists, a
warning message will appear. Rename the
file in step 4 above or save the file by one of
the following two methods:
OVER WRITE : Overwrite the existing file.
NUMBERING : Append a number to the
filename.
