Hioki 3511-50, Instruction Manual, Page: 95 / 140

83
________________________________________________________________________________________________________________
6.15 Commands Specific to the 3511-50
________________________________________________________________________________________________________________
:COMParator
Enables and disables the comparator function.
:COMParator?
Queries the comparator function enablement.
:COMParator:FLIMit
Sets the lower and upper limit values for the first comparator parameter.
Syntax :COMParator
<data>
<data>
ON/OFF (character data)
Function
Turns the comparator function on and off.
Example
Transmission
:COMParator ON
The comparator function is turned on.
Error
If <data> is other than character data described above, an execution error occurs.
Executing this command while the open or short circuit compensation is performed
generates an execution error.
Syntax COMParator?
<data>
ON/OFF (character data)
Function
Returns the current enablement state of the comparator function as character data.
Example
Response
If headers are on
:COMPARATOR ON
If headers are off ON
Error
If the response message is longer than 300 bytes, a query error is generated.
Syntax :COMParator:FLIMit
<low>,<high>
<data>
<low> (lower limit value): OFF (character data) or numerical value in NR1 format
<high> (upper limit value): OFF (character data) or numerical value in NR1 format
Function
Sets the lower and upper limit values for the first comparator parameter (i.e. the principal
measured value) as counts that are displayed on the screen.
The numerical value can be in NRf format, but rounding is performed for figures beyond
the last valid decimal place.
Example
Transmission :COMParator:FLIMit 11234,12345
The lower limit value is set to 11234, and the upper limit value is set to 12345.
Error
If <data> is other than character data or numerical value described above, an execution
error occurs.
Executing this command while the open or short circuit compensation is performed
generates an execution error.