Hioki 3511-50, Instruction Manual, Page: 93 / 140

81
________________________________________________________________________________________________________________
6.15 Commands Specific to the 3511-50
________________________________________________________________________________________________________________
:BEEPer:KEY
Enables and disables the beep sound for key input.
:BEEPer:KEY?
Queries the beep sound for key input.
:CIRCuit
Sets the equivalent circuit mode.
Syntax :BEEPer:KEY
<data>
<data>
ON/OFF (character data)
Function
Sets the beep sound produced each time a key is pressed.
ON: A beep sound is emitted.
OFF: No beep sound is emitted.
Example
Transmission :BEEPer:KEY ON
When a key is pressed, a beep sound is emitted.
Error
If <data> is other than character data described above, an execution error occurs.
Executing this command while the open or short circuit compensation is performed
generates an execution error.
Syntax :BEEPer:KEY?
<data>
ON/OFF (character data)
Function
Returns the beep sound setting for when a key is pressed as character data.
ON: A beep sound is emitted.
OFF: No beep sound is emitted.
Example
Response
If headers are on
:BEEPER:KEY ON
If headers are off ON
Error
If the response message is longer than 300 bytes, a query error is generated.
Syntax :CIRCuit
<data>
<data>
SER/PAR (character data)
Function
Sets the equivalent circuit mode.
SER: Series equivalent circuit mode
PAR: Parallel equivalent circuit mode
Example
Transmission
:CIRCuit SER
The s
eries equivalent circuit mode is set.
Error
If <data> is other than character data described above, an execution error occurs.
Executing this command while the open or short circuit compensation is performed
generates an execution error.