Hioki 3511-50, Instruction Manual, Page: 92 / 140

80
________________________________________________________________________________________________________________
6.15 Commands Specific to the 3511-50
________________________________________________________________________________________________________________
6.15 Commands Specific to the 3511-50
:BEEPer:COMParator
Sets the beep sound for the comparator.
:BEEPer:COMParator?
Queries the beep sound for the comparator.
Syntax :BEEPer:COMParator
<data>
<data>
IN/NG/OFF (character data)
Function
Sets the beep sound produced when the comparator makes decisions.
IN: When the comparator result is within limits, a beep sound is emitted.
NG: When the comparator result is out of limits, a beep sound is emitted.
OFF: No beep sound is emitted.
Example
Transmission :BEEPer:COMParator NG
When the value is out of limits, a beep sound is emitted.
Error
If <data> is other than character data described above, an execution error occurs.
Executing this command while the open or short circuit compensation is performed
generates an execution error.
Syntax :BEEPer:COMParator?
<data>
IN/NG/OFF (character data)
Function
Returns the beep sound setting for when the comparator makes decision as character data.
IN: When the comparator result is within limits, a beep sound is emitted.
NG: When the comparator result is out of limits, a beep sound is emitted.
OFF: No beep sound is emitted.
Example
Response
If headers are on
:BEEPER:COMPARATOR NG
If headers are off
NG
Error
If the response message is longer than 300 bytes, a query error is generated.