Hioki 3511-50, Instruction Manual, Page: 65 / 140

53
________________________________________________________________________________________________________________
5.3 9442 PRINTER (Option)
________________________________________________________________________________________________________________
5.3.1 Preparation
CAUTION
The 9442 is shipped with the function settings for use with the HIOKI
3166 CLAMP ON POWER HiTESTER. Before using, always change the
settings of the DIP switches.
For details on the operations and handling of the printer, refer to the
operation manual supplied to the printer.
For the printer, use the 1196 RECORDING PAPER (thermal paper, 10
rolls) or an equivalent.
5.3 9442 PRINTER (Option)
The test values are printed out.
Use with the optional 9442 PRINTER, and 9444 CONNECTION CABLE.
Use the 9442 PRINTER, the 9443* AC ADAPTER, and the 1196
RECORDING PAPER. To connect the main unit and printer, use the 9444
CONNECTION CABLE. (All are options.)
9442 DPU-414 Seiko Instruments Inc.
*9443-01 PW-4007-J1 Seiko Instruments Inc. (for Japan)
*9443-02 PW-4007-E1 Seiko Instruments Inc. (for EU)
*9443-03 PW-4007-U1 Seiko Instruments Inc. (for U.S.A.)
Setting the 9442 PRINTER communication conditions
Change the settings of the software dip switches (DIP SW) to use the 9442
for the 3511-50.
(1) Turn off the power.
(2) Turn on the power while pressing the ON LINE button. Release the button after a
list of the current settings starts printing out.
(3) The print out of the current settings is followed by the prompt: "Continue? :Push
'On-line SW'", "Write?:Push 'Paper feed SW'". Press the ON LINE button to change
the settings.
(4) "Dip SW-1" is printed to make a settings for switch number 1 to 8 of DIP SW1.
Refer to the next table.