Hioki 3511-50, Instruction Manual, Page: 23 / 140

11
________________________________________________________________________________________________________________
3.1 Choosing the Testing Parameters
________________________________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
Z-
θ
Impedance (
Ω
) - Impedance phase angle ( )
C-D Static capacitance (F) - Loss coefficient (=tan
δ
)
L-D Inductance (H) - Loss coefficient (=tan
δ
)
L-Q Inductance (H) - Q factor
R Effective resistance (
Ω
)
NOTE
Chapter 3
Basic Functions
3.1 Choosing the Testing Parameters
As shown above, the 3511-50 permits five possible combinations of testing
parameters. Cycle through the combinations by repeatedly pressing
.
Use the LED lamps to the left of the measurement display to check on
selected testing parameters.
Check polarity via the impedance phase angle. Except for impedance phase
angle, all values are displayed as absolute values.
For details, refer to Section 8.2, "Testing Parameters and Calculation
Equations."