Hioki 3511-50, Instruction Manual, Page: 46 / 140

34
________________________________________________________________________________________________________________
4.5 Various Settings Made After Switching on Power
________________________________________________________________________________________________________________
4.5.1 Setting Screen Flow After Power ON
4.5 Various Settings Made After Switching on Power
Enter settings for conditions related to system reboot (initialization of all test
conditions), interfaces, and beep sounds at comparator judgment immediately
after switching on power.
With power turned on, screens are displayed in succession in the following
order:
1. All displays light.
2. Version information displayed
3. Interface setting
4. Beep sound setting
5. Test mode (normal test or comparator test)
To change a setting, press the COUNT setting key while screens 3 and 4 are
displayed. Press
after screen 1 is displayed and before screen 2 is
displayed. The system reboot setting screen appears before screen 3 is
displayed.