Hioki 3511-50, Instruction Manual, Page: 50 / 140

38
________________________________________________________________________________________________________________
4.6 Remote Function
________________________________________________________________________________________________________________
4.6.1 Remote Mode
4.6.2 Cancelling the Remote Mode
4.6 Remote Function
External control via an interface will place the 3511-50 in remote mode
(remote control state), in which front panel key switch operations are
disabled.
Use the LED lamp to the right of the second parameter measurement display
(SUB PARAMETER) to check on the remote mode condition. This LED
lamp lights when the 3511-50 enters remote mode.
Press to cancel the remote mode. The LED lamp goes out to
indicate that remote mode is canceled.