Hioki 3511-50, Instruction Manual, Page: 87 / 140

75
________________________________________________________________________________________________________________
6.12 Command Reference
________________________________________________________________________________________________________________
Command Function
Ref
page
Communication error confirmation
:ERRor? Queries the RS-232C error. 87
Event register
:ESR0? Queries event status register 0. 87
:ESR1? Queries event status register 1.
88
Test frequency function
:FREQuency Sets the test frequency.
88
:FREQuency? Queries the test frequency.
88
Headers
:HEADer
Enables and disables headers for the response message.
89
:HEADer?
Queries headers enablement.
89
Test signal level function
:LEVel Sets the test signal level. 89
:LEVel? Queries the test signal level. 90
Panel load function
:LOAD Transfers the specified panel number. 90
Normal testings
:MEASure? Queries the data item. 91
Parameter settings
:PARAmeter Sets displayed parameters.
92
:PARAmeter? Queries displayed parameters.
92
Test range function
:RANGe Sets test range.
93
:RANGe? Queries test range setting.
94
:RANGe:AUTO
Sets the automatic test ranging.
94
:RANGe:AUTO? Queries the automatic test range setting. 94
Panel saving function
:SAVE Saves the test conditions in specified panel number. 95
:SAVE? Queries the panel number in which data is saved. 95
Test speed function
:SPEEd Sets the testing speed. 95
:SPEEd? Queries the testing speed. 96
Trigger function
:TRIGger Sets the type of trigger.
96
:TRIGger? Queries the trigger setting.
96
ID function
:USER:IDENtity Sets the user ID.
97
:USER:IDENtity? Queries the user ID.
97