Hill-Rom VersaCare P3200 Service Manual Download Page 45

Page: 45 / 379

Function Checks

Chapter 2: Troubleshooting Procedures

The Right Turn Assist bladder inflates and an alarm sounds when one of the
right side siderails is lowered.

Yes

↓

→

Go to RAP 2.24.

Place all four siderails in the up and locked position. Activate the Left Turn
Assist control.

The Left Turn Assist bladder inflates and an alarm sounds when one of the left
side siderails are lowered.

Yes

↓

→

Go to RAP 2.24.

9. Go to “Final Actions” on page 2-12.

VersaCare™ Bed Service Manual (MAN333 REV 2)

Page 2 - 11

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Search results

Summary of Contents for VersaCare P3200

Reviews:

Brands by name

Popular brands

Hill-Rom VersaCare P3200, Service Manual

Search results

Summary of Contents for VersaCare P3200

Reviews:

Brands by name

Popular brands