Hill-Rom VersaCare P3200, Service Manual

Page: 37 / 379

Initial Actions
Chapter 2: Troubleshooting Procedures
Rapid Problem/Solution Identification Tables
If the Service Required indicator is flashing or solid, use the following table to
identify the appropriate troubleshooting procedure (see table 2-1 on page 2-3).
Table 2-1. Flashing or Solid Service Required LED
Long
Flash
Short
Flash
Description Solution
1 2 Mattress Disconnected Go to RAP 2.27 on page 2-39.
1 3 Head Angle Sensor Error Go to RAP 2.28 on page 2-40.
1 5 Head FSR1 and FSR2 Go to RAP 2.29 on page 2-41.
2 2 Accumulator Pressure Go to RAP 2.30 on page 2-42.
2 3 ErRor Detected In Dynamic
Air Module Replace Air Module
2 6 Missing 24 VDC Input Go to RAP 2.31 on page 2-43.
3 1 Not Reaching Head Zone
Pressure Go to RAP 2.32 on page 2-44.
3 2 Not Reaching Seat Zone
Pressure Go to RAP 2.33 on page 2-45.
3 3 Not Reaching Foot Zone
Pressure Go to RAP 2.34 on page 2-46.
3 4 Not Reaching Right Turn
Assist Pressure Go to RAP 2.35 on page 2-47.
3 5 Not Reaching Left Turn
Assist Pressure Go to RAP 2.36 on page 2-48.
4 2 Scale Error Go to RAP 2.37 on page 2-49
through RAP 2.41 on page 2-53.
4 3 Scale Error Go to RAP 2.37 on page 2-49
through RAP 2.41 on page 2-53.
4 4 Scale Error Go to RAP 2.37 on page 2-49
through RAP 2.41 on page 2-53.
Solid Go to RAP 2.1 on page 2-13.
2
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 2 - 3