manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 163

4.10  Night Light 

Chapter 4: Removal, Replacement, and Adjustment Procedures 

NOTE: 

The fifth screw is located under the blank label. 

5.  Remove the foot pedal assembly (B) from the bed (C). 

6.  Remove the wire tie (not shown). 

7.  Disconnect the night light cable (D) from the foot pedal P.C. board. 

8.  Remove the nut (F) and washer (G) from the night light (E). 

9.  Remove the night light (E) from the foot pedal assembly (B). 

Replacement 

1.  Do the removal procedure in reverse order. 

2.  Install a new blank label over the screw hole. 

3.

 

To make sure the VersaCare™ Bed operates correctly, do the “Function 
Checks” on page 2-6. 

4 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 4 - 31 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands