manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 343

Lubrication Requirements 

Chapter 6: General Procedures 

Observe the following P.C. board handling rules: 

•  Make sure hands are clean and free of moisture, oily liquids, etc. 

• 

Only

 handle the P.C. board by its outer edges. 

•

 

Do not touch the P.C. board components. Finger contact with the board 
surface and/or with its components can leave a deposit that will result in 
board (and component) deterioration. 

•

 

When working with electronics, wear an appropriate antistatic strap, and 
make sure it is correctly grounded. 

•

 

Service the removed P.C. board at a static-free workstation that is correctly 
grounded. 

•

 

For shipping and storage, place the removed P.C. board in an antistatic 
protective bag. 

Lubrication Requirements 

There are no lubrication requirements for the VersaCare™ Bed. 

6 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 6 - 3 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands