manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 240

4.35  Drive Motor—IntelliDrive® Transport System

Chapter 4: Removal, Replacement, and Adjustment Procedures 

4.  Remove the cover (B).

5.  Disconnect the cable inside the cover (B) from the PACM board.

6.  Remove the two screws (D) securing the shroud (E) to the drive box (C).

7.  Remove the shroud (E).

8.  Remove the four screws (F) securing the drive box (C) to the bed.

9.  Remove the drive box (C) from the bed.

10. Disconnect the two drive motor cables (G) from the PACM board (H) (see 

figure 4-57 on page 4-109).

11. Disconnect the four controller wires (I) from the PACM board (H).

12. Disconnect the controller harness (J) from the PACM board (H).

13. Disconnect the battery cable (K) from the PACM board (H).

14. Remove the cover (L).

15. Remove the 12 screws (M) securing the drive assembly (N) to the drive 

box (C).

NOTE: 

The remaining screws on the box may need to be loosened to allow the drive 
assembly to be easily removed. 

16. Remove the drive assembly (N) from the drive box (C).

17. Loosen the nut (O) on the linear actuator lever (P).

18. Disconnect the linear actuator lever (P) from the drive assembly rod (Q).

19. Remove the drive assembly (N) from the motor mounting plate (R).

20. Remove the drive motor coupler (S) from the drive motor (T).

21. Remove the four screws (U) securing the drive motor (T) to the motor 

mounting plate (R).

22. Remove the drive motor (T) from the motor mounting plate (R).

Page 4 - 108 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands