manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 237

4.34  PACM Board—IntelliDrive® Transport System

Chapter 4: Removal, Replacement, and Adjustment Procedures 

4.  Remove the cover (B).

5.  Disconnect the cable inside the cover (B) from the PACM board.

6.  Remove the two screws (D) securing the shroud (E) to the drive box (C).

7.  Remove the shroud (E).

8.  Remove the four screws (F) securing the drive box (C) to the bed.

9.  Slide the drive box (F) to the patient’s right side of the bed.

10. Disconnect the four wires (H) connecting the PACM board (G) to the 

motor controller (I) (see figure 4-55 on page 4-105).

Figure 4-55.  PACM Board Removal 

11. Disconnect the motor controller harness (J) from the PACM board (G).

12. Disconnect the linear actuator cable (K) from the PACM board (G).

13. Disconnect the two drive motor cables (L) from the PACM board (G).

4 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Page 4 - 105 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands