Hill-Rom VersaCare P3200, Service Manual

Page: 144 / 379

4.4 Head Siderail
Chapter 4: Removal, Replacement, and Adjustment Procedures
Figure 4-5. Cover Removal
12. Disconnect the siderail cable from the logic control P.C. board inside the
electronics control module.
13. Remove the siderail cable from the behind the cable cover (H).
14. Remove the E-ring (K) and washer (L) from the siderail dampener (M) (see
figure 4-7 on page 4-14).
15. Disconnect the dampener (M) from the bracket post (N).
16. Remove the E-ring (O) from the lower D-pin (P).
17. Remove the E-ring (Q) from the upper D-pin (R).
18. Remove the lower D-pin (P).
19. While supporting the siderail, remove the upper D-pin (R).
Page 4 - 12 VersaCare™ Bed Service Manual (MAN333 REV 2)