manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 268

Service Parts Ordering 
Chapter 5: Parts List 

Call Hill-Rom Technical Support at (800) 445-3720 with the following 
information: 

•  Customer account number 

•  Purchase order number 

•  Product number 

•  Serial number 

•  Part number(s) 

To promptly order parts, request part prices and availability, or follow up on a 
service order, use the following Hill-Rom fax number: 

(812) 934-8472 

Terms: 

•  Net 30 days 

•  F.O.B. Batesville, IN 

•  Prepaid shipping charges added to invoice 

•  All orders shipped UPS ground unless specified 

Address all inquiries to: 

ATTN TECHNICAL SUPPORT—PARTS 
HILL-ROM COMPANY, INC. 
1069 STATE ROUTE 46 E 
BATESVILLE IN 47006-9167 

Address all return goods to: 

ATTN SERVICE STORES

DISTRIBUTION CENTER DOOR D23

HILL-ROM COMPANY, INC.

COUNTY ROAD 300E

BATESVILLE IN 47006-9167

NOTE:

To eliminate possible delays or incorrect billings, 

do not

 return any items 

without a Return Material Authorization (RMA) number. When a return is 

requested, an RMA packet is included with each order. This packet includes an 

RMA number, instructions, and a shipping label. If an RMA number is not 

available, obtain one by phoning Hill-Rom Technical Support at

(800) 445-3720.

Page 5 - 2 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands