manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 358

7.3  Standard IV Pole—P2217 
Chapter 7: Accessories 

7.3  Standard IV Pole—P2217 

Tools required: 

None 

WARNING: 

Do not exceed IV rod weight capacity, personal injury or equipment 
damage could result. 

WARNING: 

When lowering the upper section of an IV rod, always grasp and hold 
the upper section of the pole before pulling the release knob. Failure to 
do so could result in personal injury or equipment damage. 

Installation 

1.  Install the IV pole in an equipment socket at any corner of the bed. 

2.  Rotate the IV pole a quarter turn to lock it into place. 

Removal 

Reverse the installation procedure to remove the IV Rod. 

Page 7 - 4 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands