Hill-Rom VersaCare P3200, Service Manual

Page: 27 / 379

Specifications
Chapter 1: Introduction
European Mattress Flammability Codes
1
Condition Range
P3251A and P3250EA BS 7177: 1996, Specification for Resistance to Ignition
of Mattresses, Divans and Bed Bases
(Surfaces Only)
BS 5852: 1990, Assessment of Ignitability of Uphol­
stered Seating by Smouldering and Flaming Ignition
Sources
(Surfaces and Siderail Coverings Only)
BS EN 597-1: 1995, Furniture - Assessment of the
Ignitability of Mattresses and Upholstered Bed Bases;
Part 1: Ignition Source: Smouldering Cigarette
(Surfaces and Siderail Coverings Only)
BS EN 597-2: 1995, Furniture - Assessment of the
Ignitability of Mattresses and Upholstered Bed Bases;
Part 2: Ignition Source: Match Flame Equivalent
(Surfaces and Siderail Coverings Only)
BS 6807: 1996, Methods of Test for Assessment of the
Ignitability of Mattresses, Upholstered Divans and
Upholstered Bed Bases with Flaming Types of Primary
and Secondary Sources of Ignition
(Surfaces and
Siderail Coverings Only)
Electromagnetic Emissions Guidance
Guidance and Manufacturer's Declaration—Electromagnetic Emissions
The VersaCare™ Bed model P3200/P3201 is intended for use in the electromagnetic environment specified below.
The customer or the user of the model P3200/P3201 should make sure it is used in such an environment.
Emissions Test Compliance Electromagnetic Environment—Guidance
RF emissions
CISPR 11 Group 1 The model P3200/P3201 uses RF energy only for its
internal functions. Therefore, its RF emissions are low
and are not likely to cause any interference in nearby
electronic equipment.
RF Emissions
CISPR 11 Class A The model P3200/P3201 is suitable for use in all estab­
lishments other than domestic and those directly con­
nected to the public low-voltage power supply network
that supplies buildings used for domestic purposes.
Harmonic Emissions
IEC 61000-3-2 Not
Applicable
Voltage Fluctuations/
Flicker Emissions
IEC 61000-3-3 Not
Applicable
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 1 - 9