Hill-Rom VersaCare P3200, Service Manual

Page: 347 / 379

Preventive Maintenance
Chapter 6: General Procedures
Function Procedure
Sleep deck Fully raise and lower the head section.
Examine for binding during the head section movement.
Make sure the hard surface and its drive system under the head
section are in good condition.
Make sure there is no friction or abnormal noises.
Replace any damaged parts.
Replace if necessary.
CPR release Examine the handles, cables, and CPR mechanism on the head
motor.
Make sure that the screws are installed and fully tightened.
Examine the condition of the two CPR release handles, CPR cable,
and CPR mechanism on the head motor.
Operate the head section to the high position, then activate one of the
CPR releases. Make sure the head section lowers. Adjust the CPR
cable as necessary.
Do the same tests on the other side of the bed.
Release the CPR handles and make sure the mechanism locks
correctly by operating the Head Up control for a few seconds. The
head section must rise.
Replace the head section motor in the event of a malfunction or the
CPR cable if broken.
Emergency
Trendelenburg Activate the Emergency Trendelenburg function.
Make sure there is no friction or abnormal noises and that no audible
overload indication can be heard during the movement.
Replace the defective part in the event of a malfunction or abnormal
noises.
Troubleshoot in the event of a malfunction.
6
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 6 - 7