Hill-Rom VersaCare P3200, Service Manual

Page: 42 / 379

Function Checks
Chapter 2: Troubleshooting Procedures
15. Press the Foot Retraction control.
The foot section retracts to the full in position without stopping.
Yes No
↓ →
Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.
16. Press the Chair Position control.
The head section and knee section sections rise as long as the control is
pressed until the required position is reached and the foot section lowers.
Yes No
↓ →
Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.
17. Press the Chair Out control.
The head section, knee section and foot section sections gradually return to
the horizontal as long as the control is pressed.
Yes No
↓ →
Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.
18. Raise the bed until the intermediate position is reached. Operate the
Trendelenburg control.
The sleep surface gradually tilts to maximum trendelenburg without any
problem or abnormal noise.
Yes No
↓ →
Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.
19. Operate the Reverse Trendelenburg control.
The sleep surface gradually tilts to maximum reverse trendelenburg
without any problem or abnormal noise.
Yes No
↓ →
Go to RAP 2.1 on page 2-13 or go to RAP 2.16 on page 2-28.
20. Press the Head Up control until the section reaches high position.
NOTE:
Someone should be lying on the bed so that this test can be carried out
conclusively.
Pull each of the CPR handles in turn.
The head section descends quickly up to the mid-travel then the movement
is cushioned until the low position is reached. The movement occurs
without any problem or abnormal noise.
Page 2 - 8 VersaCare™ Bed Service Manual (MAN333 REV 2)