manualshive.com logo in svg

Hill-Rom VersaCare P3200, Service Manual

Share
Download
Hill-Rom VersaCare P3200 Service Manual Download Page 246

4.36  Drive Belt—IntelliDrive® Transport System 
Chapter 4: Removal, Replacement, and Adjustment Procedures 

19. Remove the chain and spring assembly (S) from the plate (T) (see figure 4-

60 on page 4-114). 

Figure 4-60.  Drive Belt Removal 

20. Remove the two screws (U) securing the return links (V) to the pulley side 

plates (W) and (X). 

21. Rotate the return links (V) up and out of the way. 

22. Remove the three screws (Y) securing the left-side pulley plate (W) to the 

drive assembly. 

23. Remove the left-side pulley plate (W). 

24. Remove the screw (Z) securing the right-side pulley plate (X) to the pulley 

shaft (AA). 

25. Remove the pulley (AB) and belt (AC) from the drive assembly. 

26. Remove the belt (AC) from the two pulleys (AB) and (AD). 

Page 4 - 114 

VersaCare™ Bed Service Manual (MAN333 REV 2) 

Summary of Contents for VersaCare P3200




























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands