Hill-Rom VersaCare P3200, Service Manual

Page: 185 / 379

4.16 Head Section Motor
Chapter 4: Removal, Replacement, and Adjustment Procedures
Figure 4-26. Cover Removal
4
10. Put the piece of wood between the head section and the weigh frame.
11. Remove the two screws (D) securing the cable cover (E) to the CPR
control box (F) (see figure 4-27 on page 4-54).
12. Remove the pin (G) from the CPR actuator pin (H).
13. Slide the CPR control box (F) down to clear the CPR actuator pin (H).
14. Remove the nut (I) from the bolt (J) (see figure 4-28 on page 4-55).
15. Remove the bolt (J) from the mounting bracket (L).
16. Remove the rue ring (M) from the pin (N) on the motor end of the motor
(K).
17. While supporting the motor (K), remove the pin (N) from the motor (K).
18. Remove the motor (K) from the head section.
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 4 - 53