Hill-Rom VersaCare P3200, Service Manual

Page: 235 / 379

4.33 Battery—IntelliDrive® Transport System
Chapter 4: Removal, Replacement, and Adjustment Procedures
11. Remove the four screws (H) securing the retaining bracket (I) to the drive
box.
12. Remove the retaining bracket (I).
13. Remove the four screws (J) securing the end plate (K) to the drive box.
14. Remove the end plate (K).
15. Remove the screws (L) securing the cables (M) to the batteries (N).
WARNING:
If battery fluid touches skin or clothing, immediately wash it off with
clean water. If battery fluid c gets in the eyes, immediately flush them
with water and consult a physician. Failure to do so could result in
personal injury.
16. Remove the batteries (N) from the drive box.
17. Dispose of the batteries according to local regulations.
Replacement
1. Do the removal procedure in reverse order.
WARNING:
Ensure the black wire on the battery is connected to the negative
terminal on the battery and the red wire is connected to the positive
terminal on the battery. Failure to do can result in personal injury or
equipment damage.
2. Connect the black wire to the negative terminal and the red wire to the
positive terminal on the battery.
3. To make sure the VersaCare™ Bed operates correctly, do the “Function
Checks” on page 2-6.
4
VersaCare™ Bed Service Manual (MAN333 REV 2) Page 4 - 103