Hewlett Packard Enterprise HPE XP7 User Manual Download Page 137

Page: 137 / 311

•

Number of FC MF/FCSE Relationships

The number of FC MF and FCSE relationships that are in

use.

•

Number of Differential Tables

The number of differential tables that are in use and the differential

table limit in the storage system. This number does not include the number of differential tables that
FC MF/FCSE Relationships use.

NOTE:

Fast Snap does not use differential tables.

In the

Replica LDEVs

tab, view the following information:

•

LDEV ID

The selected LDEV's identification number. Click the ID to open the

LDEV Properties

window. Use this window to search for pool information.

•

LDEV Name

The selected LDEV's name.

•

Emulation Type

The selected LDEV's emulation type.

•

Capacity

The selected LDEV's capacity.

•

Copy Type

The copy type for the pair you selected.

Values:

: FS pair

FS, BC, BC MF, Cnt Ac-S, Cnt Ac-S MF, Cnt Ac-J, Cnt Ac-J MF, and HA volume status:

Primary

: P-VOL

Secondary

: S-VOL

FC MF and FCSE volume status :

S-Normal

: The source volume in the normal status. S means a source volume.

T-Normal

: The target volume in the normal status. T means a target volume.

ST-Normal

: The normal volume which is set for the source volume and the target volume.

S-Failed, S-Full, S-Full & Failed

: The source volume in the abnormal status.

T-Failed, T-Full, T-Full & Failed

: The target volume in the abnormal status.

ST-Failed, ST-Full, ST-full & Failed

: The abnormal volume which is set for the source volume

and the target volume.

If you have not configured a pair, a hyphen (-) is displayed.

(Optional) To download table information to a file, click

Export

More information

Changing system options that affect Fast Snap performance on page 108
Viewing local replication summary information on page 137
Viewing Fast Snap pair task history on page 147
Replication window on page 208

Viewing local replication summary information

You can view summary local replication information, such as the number of pairs for each software
application you are using, in the summary section of the

Local Replication

window of RWC.

Viewing local replication summary information

137

Summary of Contents for HPE XP7
























































































































































































































































































































Search results

Summary of Contents for HPE XP7

Reviews:

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 137 / 311

Search results

Summary of Contents for HPE XP7

Reviews: