manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 177 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 177

Power supply and losing data in shared memory

You can still use the pool and Fast Snap pairs, because the data is restored to shared memory from SSD
after switching the power supply back on.

Definition of failure

When a failure occurs in a cascade configuration, in addition to the volume in which the failure occurs, the
following volumes are also suspended:

• Cascaded volumes under the volume in which the failure occurred.

• Volumes (including their cascade volumes) older generationally than the volume in which the failure

occurred.

The following figure illustrates the volumes to be suspended when a failure occurs.

Power supply and losing data in shared memory

177

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments