manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 230 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 230

Item

Description

Synchronization Rate (%)

For BC

• If the pair status is COPY(PD)/COPY, COPY(SP)/COPY, or PSUS

(SP)/PSUS, the copy progress rate is displayed.

• If the pair status is PAIR, PSUS, COPY(RS-R)/RCPY, or PSUE, the

synchronization rate between P-VOL and S-VOL is displayed.

• If the pair status is COPY(RS)/COPY changed from PSUE, the

copy progress rate is displayed.

• If the pair status is COPY(RS)/COPY changed from other than

PSUE, the synchronization rate between P-VOL and S-VOL is
displayed.

• If the pair status is SMPL(PD), a hyphen is displayed.

BC MF:

• If the pair status is PENDING, SP-Pend/TRANS, or V-Split/

SUSPVS, the copy progress rate is displayed.

• If the pair status is DUPLEX, Split/SUSPOP, Resync-R/REVRSY,

or Suspend/SUSPER, the synchronization rate between P-VOL
and S-VOL is displayed.

• If the pair status is Resync/PENDING, changed from Suspend/

SUSPER, the copy progress rate is displayed.

• If the pair status is Resync/PENDING, changed from other than

Suspend/SUSPER, the synchronization rate between P-VOL and
S-VOL is displayed.

• If the pair status is Deleting/TRANS, a hyphen is displayed.

For Fast Snap pairs where the cascade attribute is disabled, the rate
at which the Fast Snap S-VOL matches the next new generation of
the S-VOL. If the S-VOL is the latest one, the storage system
computes the synchronization rate by comparing the S-VOL with the
P-VOL.

For Fast Snap pairs where the cascade attribute is enabled, the
following information is displayed depending on the pair status:

• The pair status is PAIR, PSUS, or PSUE. The pair synchronization

rate shows the rate that current S-VOL data matches that of the
next generation of the S-VOL. If the S-VOL is the latest one, the
synchronization rate is computed by comparing the S-VOL with the
P-VOL.

• The pair status is COPY, PSUS(SP), RCPY, or SMPL(PD). The

progress rate of each process is displayed.

Table Continued

230

Fast Snap GUI windows and wizards

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments