manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 205 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 205

SSB2

RAID Manager
command

Cause of error

97C7

paircreate

You cannot create the FS pair because the capacity of cache
management devices is insufficient.

97C8

paircreate

You cannot create the FS pair because the capacity of the volume you
specified as the P-VOL or the S-VOL of the FS pair is more than the
supported size.

97CB

All commands

The command ended abnormally because you specified a pool that is
neither an FS pool nor a THP pool.

97CD

paircreate/map
snapshot

The command ended abnormally because you specified a
deduplication system data volume as the P-VOL of a Fast Snap pair.

97CE

paircreate/map
snapshot

The command ended abnormally because you specified a
deduplication system data volume as the S-VOL of a Fast Snap pair.

97CF

paircreate

You cannot create the FS pair because an FS group is already using
the CG number you specified.

97D4

All commands

The command ended abnormally because you are in the process of
turning off the power.

97D5

All commands

You cannot run the command because even though the specified
serial number matches the virtual storage machine, the physical
storage system's serial number that corresponds with the virtual
storage machine's serial number does not match when the virtual
storage machine's serial number is specified for P-VOL and S-VOL.

97D6

All commands

You cannot run the command because the model, serial number, or
virtual LDEV ID of the volume specified as P-VOL is being changed.

97D7

All commands

You cannot run the command because the model, serial number, or
virtual LDEV ID of the volume specified as S-VOL is being changed.

97D8

All commands

The pair operation was rejected because one of the following
conditions holds for the volume that is specified as the FS P-VOL:

• The volume is used as a High Availability pair volume and does not

accept pair operations.

• The volume is specified reservation attribute of a High Availability.

97D9

All commands

The pair operation was rejected because one of the following
conditions holds for the volume that is specified as the FS S-VOL:

• The volume is used as a High Availability pair volume.

• The volume is specified reservation attribute of a High Availability.

Table Continued

RAID Manager command reference for Fast Snap

205

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments