manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 143 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 143

NOTE: 

During the Fast Snap pair restoration process, the pair synchronization rate may not be up to

date. The task must complete for the rate to be up to date.

For the Fast Snap pair where the cascade attribute is enabled, the information displayed in
Synchronization Rate (%) of the View Pair Synchronization Rate window varies depending on the pair
status.

For more information about restoring Fast Snap pairs, see 

Restoring Fast Snap pairs

 on page 124.

Prerequisites

• You must have the Storage Administrator (Local Copy) role.

• In RAID Manager, use the 

raidcom get snapshot

 command.

You can check the percentage of data that is synchronized between the P-VOL and S-VOLs. The Fast
Snap synchronization rate shows the rate that S-VOL data matches that of the next new generation of the
S-VOL. If the S-VOL is the latest one, the synchronization rate is computed by comparing the S-VOL with
the P-VOL.

Procedure

1.

In the 

Explorer

 pane, click 

Storage Systems

, expand the storage system tree, expand 

Replication

,

and then click 

Local Replication

.

2.

In the 

Local Replication

 window, select a P-VOL in the 

FS Root Volumes

 tab or a snapshot group in

the 

Snapshot Groups

 tab.

3.

Click 

Operate FS Pairs

.

4.

In the 

FS Pairs

 window, select the pair for which you want to monitor synchronization rates, and then

click 

More Actions

 > 

View Pair Synchronization Rate

.

5.

To check a pair's status and ensure the data is current, click 

Refresh

.

The latest synchronization rates are shown.

NOTE: 

While the FS pair is being restored, the rate might not change. When the restoration

completes, the pair synchronization is updated to 100%. For Fast Snap pairs of which cascaded pairs
are enabled, information displayed in 

Synchronization Rate

 of the 

View Pair Synchronization Rate

window varies depending on the pair status.

More information

View Pair Synchronization Rate window on page 227

Monitoring consistency groups

Viewing the number of consistency groups

You can view the number of consistency groups that are in use in RWC. RAID Manager does not have a
command to perform this task.

Procedure

1.

Navigate to one of the following windows:

Monitoring consistency groups

143

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments