Hewlett Packard Enterprise HPE XP7, User Manual, Page: 118 / 311

4. In the Select Pool window, from the Available Pools table, select the pool you want to add, and then
click OK .
The selected pool is displayed in Select Pool on the Create FS Pairs window.
Example of creating complex Fast Snap pairs
A complex Fast Snap pair is a pair where the P-VOL and S-VOL are not connected one to one. The
following is an example of how to create Fast Snap pairs of different configurations simultaneously in
RWC.
In this example, one pair of two S-VOLs and another pair of one S-VOL are created simultaneously. Each
pair’s configuration is specified in the
Create FS Pairs window.
1. In Create Pairs using Volumes as Root Volumes , select Yes .
2. Select two primary volumes from the Available Primary Volumes table.
3. In Cascade , select Enable to create a cascaded pair.
4. In Pair Type , select Snapshot to create a pair with the snapshot attribute. Select Clone to create
cloned pairs.
5. Click Select Pool , and then select a pool in the Select Pool window.
6. Select Create New in Snapshot Group .
7. Enter
1
for Number of Snapshot Data per Primary Volume .
8. Select Snapshot Group Configuration .
9. Enter values for Prefix and Initial Number .
10. Click Add .
11. Select No for Create Pairs using Volumes as Root Volumes .
12. Select a primary volume for which you want to specify two secondary volumes from the Available
Primary Volumes table.
13. Select Create New in Snapshot Group .
14. Enter
1
for Number of Snapshot Data per Primary Volume .
15. Select Snapshot Group Configuration .
16. Enter values for Prefix and Initial Number .
17. Click Add .
118 Example of creating complex Fast Snap pairs