Hewlett Packard Enterprise HPE XP7, User Manual, Page: 150 / 311

Description Code Description Explanation
2051 COPY(RS) END The pair resynchronization ended normally, and
the snapshot data was deleted.
2052 COPY(RS) ENDED ABNORMAL The pair resynchronization ended abnormally.
2070 PSUE(ABNORMAL END) A failure occurred and the pair is suspended.
The pair status changed to "PSUE".
2080 ASSIGN SECONDARY
VOLUMES An S-VOL is assigned to snapshot data.
2081 REMOVE SECONDARY
VOLUMES The assignment of an S-VOL to snapshot data
is released.
2082 REPLACE SECONDARY
VOLUMES The assignment of an S-VOL to snapshot data
is changed.
2091 CLONE START Cloning pairs starts.
2092 CLONE END Cloning pairs ended normally.
2093 CLONE CANCEL Cloning pairs was interrupted.
2094 CLONE ENDED ABNORMAL Cloning pairs ended abnormally.
Viewing licensed capacities
Prerequisites
• You must have the Storage Administrator (Local Copy) role.
• In RAID Manager, use the
raidcom get license
command.
You can view the licensed capacities using the Replication window in RWC.
Procedure
1. In the Explorer pane, click Storage Systems , expand the storage system tree, and then click
Replication .
2. View a list of licensed capacity in the summary section of the Replication window.
Viewing the number of cache management devices
For more information, see the View Management Resource Usage window in the HPE XP7 Provisioning
for Open Systems User Guide .
NOTE: RAID Manager does not have a command to perform this task.
You can view the current number of cache management devices that are available and in use and the
maximum amount of cache management devices you can create in the storage system in the
View
Management Resource Usage window in RWC.
150 Viewing licensed capacities