manualshive.com logo in svg

Hewlett Packard Enterprise HPE XP7, User Manual, Page: 88 / 311

Share
Download
Hewlett Packard Enterprise HPE XP7 User Manual Download Page 88

Configuring Fast Snap

Prerequisites for configuring Fast Snap

Before you perform Fast Snap configuration tasks, complete the following tasks:

• Install a sufficient amount of shared memory.

For more information about installing shared memory, contact HPE technical support.

• Create a V-VOL management area in the shared memory. This area is automatically created when you

install additional shared memory.

Workflow for configuring Fast Snap

The following image shows the configuration tasks workflow and the workflow for creating and managing
Fast Snap pairs.

Steps for configuring Fast Snap:

NOTE: 

The V-VOL management area must be created in shared memory. It is created automatically

when you add shared memory. For details, contact HPE technical support.

88

 Configuring Fast Snap

Summary of Contents for HPE XP7
























































































































































































































































































































Reviews:

No comments