Hewlett Packard Enterprise HPE XP7, User Manual, Page: 204 / 311

SSB2 RAID Manager
command Cause of error
97B6 paircreate You cannot create the FS pair because of one of the following
reasons:
• You were in the process of creating a new snapshot group but you
reached the maximum number of snapshot groups that can be
created.
• You have specified a snapshot group which has reached the
maximum number of pairs allowed in a group.
97B7 paircreate You cannot create the FS pair because the THP pool is being
initialized.
97B9 paircreate, pairsplit,
pairresync,
pairresync -restore The command ended abnormally because the status of the pairs using
the P-VOL you specified is suspended ("PSUE" status).
97BD mount snapshot/
unmount snapshot The command ended abnormally because you specified a P-VOL that
is not an FS P-VOL.
97BE mount snapshot/
unmount snapshot The command ended abnormally because you specified a volume that
does not exist.
97BF paircreate You cannot create the FS pair from the consistency group to which the
specified snapshot group belongs because of one of the following
reasons:
• BC is using the specified consistency group.
• You have reached the maximum number of pairs that can be
created for a consistency group.
• A pair that uses the same P-VOL exists already in the specified
snapshot group.
97C2 All commands The command ended abnormally because you specified an MU
number outside the allowable range.
97C4 All commands The command ended abnormally because of one of the following
reasons:
• You have specified a pool that is neither an FS pool nor a THP
pool.
• You have specified a pool that does not exist.
97C6 paircreate, pairsplit,
pairresync, or
pairresync -restore The command ended abnormally because FS is not installed.
Table Continued
204 RAID Manager command reference for Fast Snap